Where can you get help in choosing the one that’s right for you?

If you are in the market for UPS power protection – and this is the first time you have thought about it – trawling the internet for information can be frustrating and you could end up more confused than ever. It’s a big subject, and a specialist one.

UPS manufacturers are a great source of information but much of it is either technical (geared towards electrical engineers rather than end users) or biased towards a certain type of technology.

If you’ve already got a UPS installed, you’ll have a good idea (based on past experience) of what to look for when it comes to upgrading or replacing it. However, in the past few years the power protection industry has undergone an evolutionary process of change and development of UPS products, solutions and services, driven largely by the desire for greater energy efficiency and lower lifetime costs of UPS systems overall. Advances in technology and manufacturing have resulted in smaller, more powerful products with fewer component parts and which are more reliable and sophisticated than their forebears.

Which UPS should I choose and where can I go for objective information?

Sadly, there are few places you can get information like this for free. UPS specialist resellers and manufacturers are running businesses from which they need to make a profit and they usually either charge for consulting advice or give it for free if they can then sell you their products. You may not be at the stage where you are ready to choose your UPS manufacturer or their products so, what can you do?

As luck would have it, we’ve written a book: The Power Protection Guide – the design, installation and operation of uninterruptible power supplies, which was published in 2007. It’s available from Amazon, all good booksellers and our own estore. At 290 pages, it details all of the elements you need to think about in terms of UPS power protection – and although our publisher insists on a cover price of £28-95, it offers great value for money and may even save money for you in the long-term. Armed with knowledge, you will be in a better position to get what you need and negotiate a good price.

Covering such items as criticality, UPS topologies and designs, UPS sizing and selection, online UPS designs, building in UPS reliability and resilience, batteries and alternative UPS back up solutions, UPS and generators, UPS monitoring and remote control, UPS logistics and installation, UPS warranties, maintenance and service, the book provides a handy tool for anyone responsible for assuring the delivery of critical power supplies for the continuity of their business – whatever business that might be. We’ve purposely incorporated a detailed index to make it easy to reference and appended some useful forms and worked examples. It is illustrated throughout with clear diagrams, charts and graphs.

Anyone reading an electrical magazine of late can’t help but notice the rising interest in (and column inches devoted to) the subject of voltage optimisation.

In 1995, the European Union set out to harmonise the single-phase mains supply voltage across countries. Prior to that, variation existed country-to-country from 220, 230 or 240Vac 50Hz. It was down to manufacturers of electrical equipment to optimise their products for each country or region. 230Vac became the nominal standard (prior to which the UK operated at 240Vac). Three-phase mains nominal voltage was harmonised to 400Vac.

A problem arose because many large electricity consumers found that much of the electrical equipment they use to run their businesses now operates inefficiently at the new rating and thus wastes considerable electricity each year.

Voltage optimisation technology providers stepped in to stem the problem by developing technology that sits between mains power and connected loads to provide a steady-state 230Vac or 400Vac supply to ensure optimal load voltage efficiency, whether resistive or inductive/capacitive loads.

My question is: can it be recommended for mission critical applications and is such technology really the best option when UPS themselves are the ultimate voltage optimiser?

Firstly, UPS protect connected loads from breaks in mains supply AND from mains-borne power problems such as sags, surges, brownouts and so on, which a voltage optimisers cannot do as effectively.

Secondly, although most online UPS are installed as 230Vac (single-phase) or 400Vac (three-phase) output, they can be configured manually to provide other voltages such as: 220/230/240Vac or 380/400/415Vac. Loads are automatically supplied by a UPS with the level of voltage and current required to perform at their optimal frequency. UPS also provide battery back up and/or connection to an alternative energy source (such as a generator) to protect loads in the event of a mains failure. Today’s online UPS can also achieve operating efficiency figures of 96% and higher (if operated in certain power modes).

Voltage optimisers carry a lower capital cost compared with UPS but they do not provide the higher levels of power protection required by the critical loads that run today’s always on businesses. In my view, UPS are better at the job of both power protection and voltage optimisation.

Another new innovation from our Italian TEC design team is the latest generation of NetMan SNMP adapters for Riello UPS. Here is a short Technical Bulletin on the product.